FireProtect is a wireless fire detector that works round-the-clock and immediately notifies the owner in case of smoke or rapid temperature increase.
- Registers smoke and rapid temperature increase indoors
- Can operate independently from Ajax hubs, notifying of emergency using a built-in siren
- Promptly notifies when it is time to clean the smoke chamber
The device detects smoke using photoelectric sensor. If no smoke is emitted, an additional sensor registers temperature increase in the room.
FireProtect can operate independently from the hub, notifying of emergency using a built-in siren. Two types of sensors indicate smoke and fire simultaneously.
Installation and set up
FireProtect is ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click in the Ajax mobile app, FireProtect can be connected to the hub. With SmartBracket, mounting takes just a few minutes.
Installation method: Indoors
Sensing element: Photoelectric and temperature sensors
Activation threshold: +59°С ±2°С
Type of notification: Sound/light
Volume of built-in siren: 85 dB
Alarm signal delivery time: 0.15 s
False alarm filter: +
Interconnected alarms: +
Power supply: Two CR2 batteries (3 V). Backup battery: CR2032
Battery life: Up to 4 years
Jeweller radio technology: Communication range with central unit — up to 1,200 m in an open space. Operating frequencies — 868.0-868.6 MHz. Self-adjusting RF output power — up to 20 mW. Block encryption based on AES algorithm
Permissible humidity: Up to 80%
Anti-sabotage: Protection against fraud, jamming detection, tamper
Remote setting and testing: +
Dimensions: 132 × 132 × 31 mm
Weight: 220 g