- Flush-mounted radio module
- Integrates existing installations (lighting, sockets…) into a Z-Wave network
- Works with momentary or toggle switches
- Maximum load: max. 2x 1150W
- Without energy reading
What is it?
Aeotec Dual Nano Switch is a low-cost Z-Wave Switch specifically used to enable Z-Wave command and control (on/off) of any wall switches. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status.
It can connect to 2 external manual switches to control the load ON/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Dual Nano Switch. The Dual Nano Switch is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.
How does it work?
Nano Switch offers total control, easily. Incredibly small, each Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
Install Nano Switch behind your wall’s power sockets and you now have wireless control and scheduling of your electronics. With optional power metering, you can reduce how much those electronics are costing you.
If you have lighting that doesn’t need dimming, install Nano Switch behind your existing wall switch to convert it to a wireless wall switch. You’ll have full wireless switch control, along with intelligent automation and scheduling via Z-Wave.
Once installed behind a switch or socket, Nano Switch offers unparalleled wireless control via Z-Wave Plus. It lets you control, automate and monitor your lights and power sockets from anywhere, anytime. And it does it all through enhancement – with Nano Switch, your sockets and switches don’t have to be replaced and they’ll continue to offer the same manual control that you’re used to.
Nano Switch is a tool that installs in a few minutes. It lets you control, monitor, automate and schedule the electronics in your home. Control the electronics you use every day – your lights, appliances and entertainment systems. There’ll also be the electronics that become a part of your smart home as it grows – security and safety devices, electronics indoors and out. If there’s a reason to automate it, to monitor it or make it responsive, Nano Switch is the invisible, controlling, and responsive touch.
Dual Nano Switch works with your existing switches and sockets and can be easily controlled and scheduled trough the Z-Wave network by a Z-Wave gateway and app. It can also be controlled by other Z-Wave devices such as Aeotec’s WallMote.
Beside its small size that allows your Dual Nano Switch to be installed behind your home’s switches or sockets, Nano Switch also features with In-built surge protection and AES-128 bit wireless encryption.
What’s in the box?
- Aeotec Dual Nano Switch
- Quick start guide